X1 Pile Driver
| Parameter | Metric | US |
|---|---|---|
| DIMENSIONS & WEIGHT | ||
| Working size (L × W × H) | 4,000 × 2,150 × 6,000 mm | 157 × 85 × 236 in (13.1 × 7.1 × 19.7 ft) |
| Transport size, folded (L × W × H) | 3,700 × 2,150 × 2,700 mm | 146 × 85 × 106 in (12.1 × 7.1 × 8.9 ft) |
| Operating weight | 6,500 kg | 14,330 lb |
| Chassis (track frame) | 2,500 × 2,000 × 620 mm | 98 × 79 × 24 in |
| POWER & HYDRAULICS | ||
| Engine power | 97 kW | 130 hp |
| Hydraulic system pressure (max) | 20 MPa | 2,900 psi |
| Total hydraulic flow | 120 L/min | 31.7 gal/min |
| Hydraulic oil tank (effective) | 146 L | 38.6 gal |
| Diesel fuel tank (effective) | 165 L | 43.6 gal |
| HAMMER & PILING | ||
| Hammer impact energy | 1,260 J | 929 ft·lb |
| Hammer type | High-frequency hydraulic hammer, 85 mm borer pole | 3.35 in borer pole |
| Max pile length | 7.0 m | 23.0 ft |
| Max driving depth | 4.8 m | 15.7 ft |
| Drilling depth (standard) | 3,500 mm | 11.5 ft |
| Drilling diameter (impact drilling) | 65–350 mm | 2.6–13.8 in |
| Optional functions | Pile driving · DTH drilling · Auger drilling · Ground screwing | |
| MAST & POSITIONING | ||
| Guide rail sliding stroke, left / right (max) | 500 mm | 19.7 in |
| Guide rail sliding stroke, front / back (max) | 300 mm | 11.8 in |
| Upper-body (chassis) rotation | 180° | |
| Mast tilt, side (supine angle) | Left 7° / Right 64° | |
| Mast tilt, front / rear | Forward 10° / Backward 10° | |
| Guide rail | Integral lifting guide rail, double-row chain; rail plants vertically into ground while driving | |
| TRAVEL | ||
| Maximum travel speed | > 2.5 km/h | > 1.6 mph |
| Grade ability | 20° | |
| X1 AUTOMATION KIT | ||
| Automation controller | Mango — real-time operating system (RTOS) for deterministic, stable automation; 300 MHz processor clock; IP6kX / IPx9K / IPx6K protection against dust and high-pressure water jets; operating temperature -40°C to +85°C (-40°F to 185°F); EMC Directive 2014/30/EU compliant | |
| GNSS receiver | Dual-antenna receiver for high-precision position and orientation; multi-constellation RTK support — centimeter-level accuracy; integrated UHF radio (403–473 MHz); galvanic isolation on CAN bus & power supply; IP65; operating temperature -20°C to +50°C (-4°F to 122°F) | |
| Display (Xpanner Display HMI) | Sunlight-readable 10.1″ touch display, 1,000 nits; MIL-STD-810H durability (shock, vibration, extreme conditions); IP65 ingress protection | |
| Control | Xpanner Remote Controller — remote button-activated, one-touch automation; full machine control, manual override, e-stop | |
| Automated functions | Automated driving & alignment (pile-to-pile and row-to-row); automated vertical alignment & positioning (consistent plumb and placement accuracy); automated hammering & height control (optimal impact force and driven depth) | |
| Software | Xpanner Connect web-based dashboard — real-time progress tracking, quality control and data sharing across machines for fleet-wide visibility; intuitive UI for site calibration and machine setup; customizable to each site’s SOPs | |
Specifications subject to change without notice.